Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ARM PROCESSOR full report
Post: #1

[attachment=1177]
ARM partners will be able to differentiate and optimize ARM11 cores for power and performance, exploiting the characteristics of their own process technologies. The new microarchitecture is targeted at next-generation high-end portable and wireless applications, consumer, networking, and automotive applications. There are many features that will also make ARM11 processors highly suited to high-end embedded realtimeapplications, such as future networking and in-home entertainment products now require



History of RISC computers

First commercial RISC in 1985 by Acorn

First low-cost RISC-powered PC in 1987 by Acorn

ARM (joint venture of Acorn+Apple+VLSI) was established in Nov 1990

StrongARM (joint venture of ARM+Digital) established in 1998

Intel bought the license for StrongARM from ARM
Post: #2
ECG applicattion by bluetootrh data transmission
Post: #3
Superb Presentation there.
Post: #4
please ask in http://seminarprojectsnewthread.php?fid=29 for different topic other than ARM PROCESSOR, because this page only dedicated to ARM PROCESSOR.
.....please co operated with us.....
Post: #5
[attachment=7128]
ARM PROCESSORS

By,
NIMMI JAMES
S7 EC-A
ROLL NO:46


Brief history of ARM

Founded in 1990.
ARM -Advanced Risc Machines
32bit RISC processor from ARM Holdings.
ARM Holding is a joint venture between Acron computers, Apple computers and VLSI Technology
Post: #6
PRESENTED BY:
MAHIN BASHA SYED

[attachment=9269]
RISC CONCEPTS WITH ARM
cisc evolution

 THE ART OF PROCESSOR DESIGN IS TO DEFINE AN INSTRN SET THAT SUPPORTS FUNCTIONS
 WHAT SORT INSTRN SET MAKES A GOOD COMPILER TARGET
WHY DOES COMPILER NEEDED???
 THE SEMANTIC GAP BETWEEN A HIGH LEVEL LANGUAGE CONSTRUCT AND A MACHINE INSTRN IS BRIDGED BY COMPILER
COMPILER TARGET ??
 THE AIM OF PROCESSOR DESIGN SHOULD DEFINE HIS OR HER INSRTN SET TO BE GOOD COMPILER TARGET
 THIS LEDS TO THE CISC DEVELOPMEENT
 MINI COMPUTERS DEVELOPED WHICH HAS MAIN MEMORY CONTROLLED BY MICRO CODE ROMS WHICH ARE FASTER THAN MAIN MEMORY
 MINI COMPUTERS USES CISC
 IN 1970, MICRO PROCESSORS DEVEL0PED FASTLY IN SEMICONDUCTOR INDUSTRY BUT MICRO CODE ROM IS NEEDED FOR ALL COMPLEX ROUTINES
 CISC IS NOTHING BUT MP WITH MINICOMPUTER INSTRN SET
WHAT IS CISC ??
 CISC is an acronym for Complex Instruction Set Computer and are chips that are easy to program and which make efficient use of memory. Since the earliest machines were programmed in assembly language and memory was slow and expensive,
WHAT IS RISC ??
 RISC, or Reduced Instruction Set Computer. is a type of microprocessor architecture that utilizes a small, highly-optimized set of instructions, rather than a more specialized set of instructions often found in other types of architectures.
Post: #7
[attachment=10866]
History
 Started in 1983 as a project for Acorn Computers Ltd
 The original processor was an advanced MOS Technology 6502 (an 8-bit microprocessor designed by MOS Technology in 1975 considered the least expensive at the time
History
 ARM1
 Completed in 1985
 ARM2
 First “real” production systems
 32-bit data bus
 26-bit address space
 16 32-bit registers (one of these served as the program counter
 Only 30000 transistors
 Did not have microcode
 No cache
 Performed better than the 286
 4 million instructions per second
 ARM3
 Consisted of a 4kb cache
History
 In the late 1980’s Apple Computer started working with Acorn and the company became Advanced RISC Machines
 ARM6
 Apple used the ARM6-based ARM 610 as the basis for the Apple Newton PDA
History
 ARM6
 35000 transistors
 ARM7TDMI
 Most successful implementation
 DEC licensed this design and produced the StrongARM
 StrongARM
 233MHz
 Drew only 1 watt of power
 Took over by Intel in a lawsuit and since then Intel developed the XScale (found in products such as the Dell Axim)
History
 The following companies all licensed the basic ARM design for various uses
 Motorola
 IBM
 Texas Instruments
 Nintendo
 Philips
 VLSI
 Sharp
 Samsung
 Uses
 Hard-drives
 Mobile phones
 Routers
 Calculators
 Toys
 Accounts for over 75% of embedded CPU’s
Introduction to ARM
 RISC design
 Most of the instructions can be executed in one clock cycle
 Low power consumption (no heat sinks or fans required)
 Easy to program
 Allows for pipelining
 Thumb
 NEON
 Jazelle
Registers
 16 registers (R0 to R15
 R13 – used for stack operations
 R14 – used for the link register (used for storing return addresses in the construction of sub routines
 R15 – the program counter
ARM Assembly
MODE 28 :REM If you have an A310 etc. try MODE 15
DIM mcode% 1024 :REM This line reserves 1024 bytes of memory REM which start at position mcode%
P%=mcode% :REM P% is a reserved variable which acts as a pointer
REM while assembling the code
REM we wish the code to start at mcode%
[ :REM Note this is the square bracket (to the right
REM of the P key).
REM This tells BASIC to enter the ARM assembler, all REM commands from now are in ARM assembler.
ADD R0,R1,R2 :REM Our ARM code instruction MOV PC,R14
:REM This instruction copies the value in R14 (link
REM register contains the return address to return to
REM BASIC) into the program counter hence
REM jumping to the next BASIC line after running
REM our ARM code program.
] :REM Leave the ARM code assembler and return to BASIC.
ARM Assembly
INPUT"Enter an integer value "B%
INPUT"Enter another integer value"C%
REM These two lines therefore will give their values to R1 and R2.
A%=USR(mcode%) :REM This line runs the ARM code starting
REM at mcode%
REM (our assembled code) returning the
REM value in R0 to BASIC.
PRINT"The answer is ";A% :REM Print the answer. END
ARM Assembly
MODE28
DIM mcode% 1024
P%=mcode%
[
ADD R0,R1,R2
MOV PC,R14
]
INPUT"Enter an integer value "B%
INPUT"Enter another integer value"C%
A%=USR(mcode%)
PRINT"The answer is ";A%
END
Listing
 00008FD8
 00008FD8 E0810002 ADD R0,R1,R2
 00008FDC 1A0F00E MOV PC,R14
Post: #8
Information 
please send me a report of arm
Post: #9
to get information about the topic ARM PROCESSOR full report ,ppt and related topic refer the link bellow

http://seminarprojectst-arm-processor-full-report

http://seminarprojectst-arm-processor-based-projects-for-students

http://seminarprojectst-arm-processor-full-report?page=2

http://seminarprojectst-arm-processor-based-major-projects-for-electronics

http://seminarprojectst-arm-processor-tutorial

http://seminarprojectst-arm-processor-based-major-projects-for-electronics?pid=51212#pid51212
Post: #10
please mail me full report on arm processor my mail is ncsbalaji[at]gmail.com
Post: #11
to get information about the topic ARM PROCESSOR full report ,ppt and related topic refer the link bellow

http://seminarprojectst-arm-processor-full-report

http://seminarprojectst-arm-processor-based-projects-for-students

http://seminarprojectst-arm-processor-full-report?page=2

http://seminarprojectst-arm-processor-based-major-projects-for-electronics

http://seminarprojectst-arm-processor-tutorial

http://seminarprojectst-arm-processor-based-major-projects-for-electronics?pid=51212#pid51212
 

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Image Verification
(case insensitive)
Please enter the text within the image on the left in to the text box below. This process is used to prevent automated posts.

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  wireless charging through microwaves full report project report tiger 90 54,219 27-09-2016 04:16 AM
Last Post: The icon
  Transparent electronics full report seminar surveyer 7 12,606 13-04-2016 10:35 AM
Last Post: dhanyavp
  Wireless Power Transmission via Solar Power Satellite full report project topics 30 39,010 30-03-2016 03:27 PM
Last Post: dhanyavp
  surge current protection using superconductors full report computer science technology 13 17,075 16-03-2016 12:03 AM
Last Post: computer science crazy
  paper battery full report project report tiger 56 50,268 16-02-2016 11:42 AM
Last Post: Guest
  IMOD-Interferometric modulator full report seminar presentation 3 3,576 18-07-2015 10:14 AM
Last Post: [email protected]
  digital jewellery full report project report tiger 36 53,339 27-04-2015 01:29 PM
Last Post: seminar report asees
  LOW POWER VLSI On CMOS full report project report tiger 15 13,454 09-12-2014 06:31 PM
Last Post: seminar report asees
  eddy current brake full report project report tiger 24 23,535 14-09-2014 08:27 AM
Last Post: Guest
  dense wavelength division multiplexing full report project reporter 3 3,360 16-06-2014 07:00 PM
Last Post: seminar report asees